Paving Slabs

At O’ Hora Pre-Cast Concrete we have an extensive range of paving slabs. If you have any queries or want a quote, do not hesitate to contact us directly.

Paving Slabs: 450mm x 450mm
Available in 6 designs and 3 colours: Plain Concrete | Charcoal Grey | Red
 
Cobble Paving Stone 450mm x 450mm

Cobble Paving Stone 450mm x 450mm

Slate Paving Stone 450mm x 450mm

Slate Paving Stone 450mm x 450mm

Herring Bone Paving Stone 450mm x 450mm

Herring Bone Paving Stone 450mm x 450mm

Riven Slate Paving Stone 450mm x 450mm

Riven Slate Paving Stone 450mm x 450mm

Non-Slip Paving Stone 450mm x 450mm

Non-Slip Paving Stone 450mm x 450mm

Crazy Paving Stone 450mm x 450mm

Crazy Paving Stone 450mm x 450mm

 
Paving Slabs: 600mm x 600mm
Available in 2 designs and 2 colours: Plain Concrete | Charcoal Grey
 
Riven Slate Paving Stone 600mm x 600mm

Riven Slate Paving Stone 600mm x 600mm

Non-Slip Paving Stone 600mm x600mm

Riven Slate Paving Stone 600mm x 600mm

 
 
 
 
 
 
 
 
 
TerraPave
Available in: 400mm x 400mm x 50mm | 600mm x 400mm x 50mm
 
 TerraPave Verona

TerraPave Verona

TerraPave Rimini

TerraPave Rimini

 TerraPave Milano

TerraPave Milano

Canterra
Available in: 400mm x 400mm x 40mm | 600mm x 400mm x 40mm
 
Sandstone Canterra Paving Flag

Sandstone Canterra Paving Flag

Silver Canterra Paving Flag

Silver Canterra Paving Flag

Slate Canterra Paving Flag

Slate Canterra Paving Flag

 

 

 

 

 
 
 
 
Plaza
Available in: 400mm x 400mm x 50mm
 
Plaza Sandstone Paving

Plaza Sandstone Paving

Plaza Silver Paving

Plaza Silver Paving

Plaza Slate Paving

Plaza Slate Paving

 

Laying Paving Slabs
  1. All loose material should be cleared from the area to be paved and the site excavated to the required depth.
  2. Dig out any soft spots and infill with suitable, well compacted gravel. The surface of this sub-base should be blinded with fine sand to achieve a smooth and even surface to within 15mm of the correct levels.
  3. A mortar bedding should be used to lay the slabs, made from a mix of 5:1 sand:cement. It is recommended that all concrete slabs are sealed with protective sealant to prevent environmental damage.
  4. After laying, the joints should be filled with a very dry 3:1 mortar mix and well rammed in with a piece of timber or steel. To avoid staining of the units, spillages or excess material should be cleaned immediately with a wet sponge. The dry mortar mix also helps in this regard.
 
PageLines